Underwriters Laboratories Network IR Speed Dome Camera Manual de usuario descargar pdf (Pagina 99)

User Manual of Network Camera

Appendix 2 Port Mapping

The following settings are for TP-LINK router (TL-WR641G). The settings vary

depending on different models of routers.

Steps:

1. Select the WAN Connection Type, as shown below:

Figure A.2.1 Select the WAN Connection Type

2. Set the LAN parameters of the router as in the following figure, including IP

address and subnet mask settings.

Figure A.2.2 Set the LAN parameters

3. Set the port mapping in the virtual severs of Forwarding. By default, camera uses

port 80, 8000 and 554. You can change these ports value with web browser or

client software.

Example:

When the cameras are connected to the same router, you can configure the ports of

a camera as 80, 8000, and 554 with IP address 192.168.1.23, and the ports of

1 2 ... 94 95 96 97 98 99 100

Sin comentarios

Underwriters Laboratories Network IR Speed Dome Camera Manual de usuario Pagina 99