Underwriters Laboratories Network IR Speed Dome Camera Manual de usuario descargar pdf (Pagina 71)

User Manual of Network Camera

(Normally Open) and NC (Normally Closed). Edit the name to set a name for the

alarm input (optional).

Figure 6-41 Alarm Input Settings

3. Click Edit to set the arming schedule for the alarm input. Refer to Task 2 Set the

Arming Schedule for Motion Detection in Section 6.6.1.

4. Check the checkbox to select the linkage method taken for the alarm input. Refer

to Task 3 Set the Alarm Actions for Motion Detection in Section 6.6.1.

5. You can also choose the PTZ linking for the alarm input if your camera is

installed with a pan/tilt unit. Check the relative checkbox and select the No. to

enable Preset Calling, Patrol Calling or Pattern Calling.

6. You can copy your settings to other alarm inputs.

7. Click Save to save the settings.

6.6.4 Configuring Alarm Output

Steps:

1. Enter the Alarm Output Settings interface:

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 99 100

Sin comentarios

Underwriters Laboratories Network IR Speed Dome Camera Manual de usuario Pagina 71