Underwriters Laboratories Network IR Speed Dome Camera Manual de usuario descargar pdf (Pagina 38)

User Manual of Network Camera

Notes:

 The valid value range of MTU is 500 ~ 1500.

 The Multicast sends a stream to the multicast group address and allows multiple

clients to acquire the stream at the same time by requesting a copy from the

multicast group address. Before utilizing this function, you have to enable the

Multicast function of your router.

3. Click Save to save the above settings.

Note: A reboot is required for the settings to take effect.

6.3.2 Configuring Port Settings

Purpose:

You can set the port No. of the camera, e.g. HTTP port, RTSP port and HTTPS port.

Steps:

1. Enter the Port Settings interface:

Configuration > Basic Configuration > Network > Port

Or Configuration > Advanced Configuration > Network > Port

Figure 6-7 Port Settings

2. Set the HTTP port, RTSP port and HTTPS port of the camera.

HTTP Port: The default port number is 80, and it can be changed to any port No.

which is not occupied.

RTSP Port: The default port number is 554 and it can be changed to any port No.

ranges from 1024 to 65535.

HTTPS Port: The default port number is 443, and can be changed to any port No.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 99 100

Sin comentarios

Underwriters Laboratories Network IR Speed Dome Camera Manual de usuario Pagina 38