
SmartWatch® IP PTZ Dome Cameras - Manual
video image and drag a rectangle area in the lower right direction, the dome will move
the position to the center and allow the rectangle area to zoom in. Use the left key of
mouse to drag a rectangle area in the upper left direction to move the position to the
center and allow the rectangle area to zoom out.
Proportional Pan/Tilt
Proportional pan/tilt automatically reduces or increases the pan and tilt speeds
according to the level of zoom. At telephoto zoom settings, the pan and tilt speeds will
be slower than at wide zoom settings. This keeps the image from moving too fast on
the live view image when there is a large amount of zoom.
Auto Focus
The auto focus enables the camera to focus automatically and maintain clear video
images.
Day/Night Auto Switch
The speed domes deliver color images during the day. And as light diminishes at night,
the speed dome will switch to night mode and deliver black and white images with
high quality.
Slow Shutter
In slow shutter mode, the shutter speed will automatically slow down in low
illumination conditions to maintain clear video images by extending the exposure time.
This feature can be enabled or disabled.
Backlight Compensation (BLC)
If you focus on an object against strong backlight, the object may be too dark. The BLC
(Backlight Compensation) function can compensate light to the object in front to make
it clear (this may cause the over-exposure of the background where the light is strong.)
Wide Dynamic Range (WDR)
The wide dynamic range (WDR) function helps the camera provide clear images even
under back light circumstances. When there are both very bright and very dark areas
simultaneously in the field of view, WDR balances the brightness level of the image to
provide clear images with details.
This feature varies depending on speed dome models.
White Balance (WB)
White balance can remove the unrealistic color casts. White balance is the white
rendition function of the camera that will adjust the color temperature according to
the environment automatically.
Patrol
A patrol is a recording of pre-defined presets. The scanning speed between two presets
and the dwell time at the preset are programmable.
Pattern
A pattern is a recording of pan, tilt, zoom, and preset functions. By default the focus
and iris are in auto mode when the pattern is being recorded.
Power Off Memory
The dome supports a power off memory function. When power is restored the dome
resumes its previous position.
Comentarios a estos manuales