Underwriters Laboratories Network IR Speed Dome Camera Manual de usuario Pagina 45

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 90
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 44
UserManualofIRNetworkSpeedDome
44
The main stream is usually for recording and live viewing with good bandwidth,
and thesubstreamcan be usedfor liveviewingwhen the bandwidth islimited.
Refer to the Section 6.1 Configuring Local Parameters for switching the main
streamandsubstreamforliveviewing.
3. You can customize the following parameters for the selected main stream or
substream:
VideoType:
Selectthestream typetovideostream,orvideo &audiocompositestream.The
audiosignalwillberecordedonlywhentheVideoTypeisVideo&Audio.
Resolution:
Selecttheresolutionofthevideooutput.
BitrateType:
Selectthebitratetypetoconstantorvariable.
VideoQuality:
WhenbitratetypeisselectedasVariable,6levelsofvideoqualityareselectable.
FrameRate:
Theframerateistodescribethefrequencyatwhichthevideostreamisupdated
and it is measured by frames per second (fps). A higher frame rate is
advantageous when there is movement in the video stream, as it maintains
imagequalitythroughout.
Max.Bitrate:
Set the max. bitrate to 32~16384 Kbps. The higher value corresponds to the
highervideoquality,butthehigherbandwidthisrequired.
VideoEncoding:
TheVideoEncodingstandardcanbesettoH.264orMJPEG.
IFrameInterval:
SettheIFrameintervalfrom1to400.
4. Click tosavethesettings.
6.4.2 ConfiguringAudioSettings
Steps:
1. EntertheAudioSettingsinterface
Configuration>BasicConfiguration>Video/Audio>Audio
OrConfiguration>AdvancedConfiguration>Video/Audio>Audio
Figure624 AudioSettings
Vista de pagina 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 89 90

Comentarios a estos manuales

Sin comentarios